Flooring (Parquet)
Classic parquet (massive)
Classic parquet (massive)
The characteristic thickness of finished massive parquet is about 21-22 mm which ensures a long life span measured in decades, even centuries. We can say that investing in this kind of investment is investing in our future and future generations that are just coming. Although they are of different dimensions, the average length ranges from 400 to 1500 mm and widths of 82 to 150 mm
It is good for the entire surface of the substrate and unlike the classic parquet, it does not have to be grinded because they already have finished treated surfaces. When installing this kind of parquet, you do not have to think of unpleasant smells and slow drying because they are already lacquered or oiled, and many and handheld brushes. Especially the oils or varnishes used are additional protection, due to the UV process that gives them their strength. With this type of parquet, a vivid wood structure is highlighted due to the accentuated v-fuse side.
Due to their structure and thickness, subsequent sanding and re-painting are possible, even when they are factory-lacquered. When deciding on such parquetry often determine durability, a great choice, the possibility of renewal and some special heat and the character to be cleaned.
Double layer and three-layer
Double layer and three-layer
One of the main features of two-layer and three - layer finished parquets is that they retain their original appearance for a long time and do not dry out. Because of their multilayer composition, they are less responsive to moisture in the substrate or in the air, and are therefore more stable. Their composition makes the upper layer- lamellas of about 4 mm thick, mostly of hardwood according to customer's choice.
The middle layer has a thickness of about 9 mm, making it a soft piece of wood while it is the lower layer of 2 mm thick veneer. The layers are cross-cut and the surface is varnished, nailed and crushed. Another advantage is that it can be laid on a floor that has built-in underfloor heating, and setting is fast and clean.
Multilayer finished parquets are produced from the highest quality natural raw materials. Aesthetically they are an attractive, natural and healthy product, therefore, it is no surprise to be more and more interested in buying this kind of parquet, not only because of its functionality, but also for more affordable prices.
VINYL FLOORS
Certified for the installation of Vinyl floor coverings within Tarkket.
homogeneous
homogeneous
Homogeneous vinyl floor coverings are made of a unique foam layer extending throughout the thickness of the material. This type of flooring has a wide range of designs that provide unlimited design options in several different levels of quality. They may or may not, have an upper protective layer that does not require additional anti-fog coating, which greatly reduces installation and maintenance costs.
heterogenous
heterogenous
Heterogeneous products according to their basic functions and characteristics are divided into three basic groups: Compact, Acoustic and Luxury Vinyl Plates Compact, heterogeneous floor coverings with polyurethane reinforced PVC foaming layer provide excellent resistance to abrasion, creasing and cracking. The key features of this collection are design and functionality. Heterogeneous vinyl floor coverings with foam backing for spaces where acoustics, comfort, durability and ease of maintenance are the most important requirements.
Epoxy and decorative floors
garage
garage
Great choice for spaces where you need to find a quality solution with lower cost of production. These anti-slip systems were created for closed and open parking areas, the food industry, production, warehouses, fish farms ...
decorative
decorative
A wide color palette, the choice of different decorative creams or desired photographs, and their overlay with a colorless resin in high gloss or matte designs, there are only some solutions for refining the space with aesthetically pleasing and decorative floor lining design.
industrial
industrial
Because of its characteristics, industrial epoxy flooring systems are suitable for heavy loads and work with loads and forklifts. They are made of anti-slip from R9 to R13 depending on the intended use of the area where they are to be incorporated and which is prescribed by the DIN standard. This system is made in one color and can be mounted on vertical surfaces.
decking floors
decking floors
Recently, more and more people are opting for wood flooring (Wood plastic composite or shorter WPC). WPC floor coverings are a challenge to floor coverings made of wood and at the same time replace them successfully. The so-called composite wood is made of 70% resistant wood 30% polymer. The wood gives compressive strength and stability while the polymer is a binder. In addition, wood is cheaper than plastic and has less thermal stretching. Before making a final decision, check out the advantages and weaknesses of these openings.
The benefits are:
WITHOUT CRACKS: Cracks will not appear on either the surface or the front page. Natural wood will begin to shoot under various weather influences, such as temperature and humidity. Moisture and dirt can be collected in these junctions.
WITHOUT LIMITATION: the surface is compact and it is not possible to cut off the pieces (such as a wooden stick) in the leg.
NOT TRULY: additional components prevent decay, while natural wood is subject to rust.
NOT NECESSARY MAINTENANCE: The coating does not need to be coated with oil, light or other protective agent, so you are free from regular maintenance. The color remains almost the same as when you chose it and does not spread like natural wood.
NATURAL FOR ENVIRONMENT: The seal has a FSC certificate, meaning that raw materials do not come from endangered wood species.
decking floors
Recently, more and more people are opting for wood flooring (Wood plastic composite or shorter WPC). WPC floor coverings are a challenge to floor coverings made of wood and at the same time replace them successfully. The so-called composite wood is made of 70% resistant wood 30% polymer. The wood gives compressive strength and stability while the polymer is a binder. In addition, wood is cheaper than plastic and has less thermal stretching. Before making a final decision, check out the advantages and weaknesses of these openings.
The benefits are:
WITHOUT CRACKS: Cracks will not appear on either the surface or the front page. Natural wood will begin to shoot under various weather influences, such as temperature and humidity. Moisture and dirt can be collected in these junctions.
WITHOUT LIMITATION: the surface is compact and it is not possible to cut off the pieces (such as a wooden stick) in the leg.
NOT TRULY: additional components prevent decay, while natural wood is subject to rust.
NOT NECESSARY MAINTENANCE: The coating does not need to be coated with oil, light or other protective agent, so you are free from regular maintenance. The color remains almost the same as when you chose it and does not spread like natural wood.
NATURAL FOR ENVIRONMENT: The seal has a FSC certificate, meaning that raw materials do not come from endangered wood species.
